NISSAN NAVARA CANOPY
UTEMASTER CENTURION ALUMINIUM TUB CANOPY
"The most accessible Ute Canopy"
Centurion Canopy to suit 2021+ Navara
Centurion Canopy to suit 2016-2020 Navara no longer available.
What is the Utemaster Centurion Canopy?
Because it is so strong, we can maximise access through full-width doors without compromising on the structural integrity of the canopy.
This product has been designed and manufactured in New Zealand at Utemaster's state of the art facility and focuses on three key features: Access, Strength & Security.
The most accessible canopy in the world
Finding it hard to reach your tools and equipment through small canopy windows?
Wasting time and feel frustrated when trying to access your gear?
The Utemaster Centurion Canopy features full-width doors that give you access to your gear the whole way down each side. There is no obstruction along the top edge of your tub meaning you can easily reach over and pull your gear out through the side door opening.
We were recently asked: “What are they like keeping the rain out when open ???? the worst part of my canopy is all the water tracks straight inside with wings open…”
That's so frustrating! We can only imagine how many tradespeople and recreationists out their struggle with this over the winter periods. Not only does it damage your gear inside, but it also delays progress on a job site.
We thought we'd share a video of the Utemaster Aluminium Canopy being water-tested during the design/ development phase a few months back - as you can see the built-in rain channels send any water landing on the canopy away for the inside of your tub.
Losing your tools and equipment due to a break-in is not only lost money - this can also have an impact on the time and productivity of the job you are working on. Concealed security latches mean each door is locked on both sides, making it hard to pry open.
Optional Central Locking Accessory
The Central Locking kit allows you to lock your Ute Canopy with the factory Vehicle Remote. The Central Locking kit comes complete with a plug and play loom.
Please note: Your lid can be locked manually using the supplied key. The Central Locking loom is an optional upgrade accessory.
Heavy Duty Construction
The Aluminium construction allows this canopy to carry much heavier loads than you ever could on a fibreglass or ABS canopy.
This means you can stack it with all your gear to get stuff done and enjoy life's adventures without having to worry about it cracking or damaging your tub.
With a fibreglass canopy it is hard to mount accessories such as spotlights, roof trays or anything that requires drilling into the fibreglass. This can also compromise the water-tightness and weaken the construction.
With the Utemaster Canopy being aluminium you can easily retro-fit any accessory to the body without having to worry about the structural integrity and it allows you to fully customise your setup.
Optional Cantilever Rack
The Cantilever Rack is a seriously robust optional extra for the Aluminium Canopy with a 200kg load rating.
All utes are designed to flex in between the tub and the cab. This can be problematic for roof racks that are mounted to both the cab and the canopy because it can cause damage while the flex occurs.
Because the Aluminium Canopy is so strong, which extends over the cab making it completely independent and eliminates the risk of damage to the cab! The Cantilever Rack is seriously useful and robust and is an optional extra for the Aluminium Canopy.
Cantilever Rack To Suit Nissan Navara Canopy
Cantilever Rack To Suit Nissan Navara Pro4x
Rear Roller Bar to suit Cantilever Rack
AUS Design Registration 201917366
Optional Rear Ladder Roller
Struggling to lift a kayak, ladder or trade material onto the roof of your vehicle?
The Rear Ladder Roller is an optional accessory that fits between each side of the Cantilever Roof Rack.
This makes it easier to slide heavy objects onto the rack from the rear of the vehicle.
No permanent fixtures
Looking at upgrading your ute in the near future? Have you ever tried re-selling a ute after removing a fibreglass to ABS plastic Canopy?
The Centurion Aluminium Canopy is fixed to the wellside using existing factory mounting holes. This means no damage to the wellside of your ute when the canopy is removed.
Three Year Warranty
Utemaster Ute Accessories are the toughest on the market - which is why we back our hard lids and canopies with a three-year warranty.
Centurion Aluminium Canopy Review
Paul from Laser Electrical Mudgee chose the Utemaster Centurion Canopy™ to help him get stuff done, enjoy life's adventures.
"For me, it ticks all the boxes in a work and family environment"
Watch the video to find out what makes the Centurion Canopy™ the ultimate dual-purpose Ute Accessory.
Camping & Overlanding with a Roof Top Tent
The Centurion Canopy with Cantilever Roof Rack is ideal for mounting a Roof Top Tent because of it's 200kg load capacity. Hear what Darren had to say about his new camping setup.
1) Head to our Ute Builder
2) Select your vehicle model
3) Choose a product and accessories
Click "Send Build Summary" to send yourself a full breakdown of the build with more information
Frequently Asked Questions
Q) Does having no windows in my Ute canopy fail my warrant of fitness or cause any WOF issues?
A) No issues at all, windows in a ute canopy are not a WOF requirement
Q) What is the canopy load rated to?
A) With a Cantilever Roof Tray fitted you can carry up to 200kg's of gear. The Cantilever Roof Tray evenly distributes weight across the canopy for maximum strength.
Q) What is the weight of the Canopy and Cantilever Roof Rack?
A) Canopy 75kgs, Cantilever Roof Rack 23kgs, Roller to suit Cantilever Rack 3kgs