Use the dropdowns below to select your vehicle.
You will then be able to see what's available for your vehicle model once you have.
Hit enter to search or ESC to close
Your cart summary
SELECT YOUR VEHICLE MODEL FOR A QUOTE
(freight to be calculated at checkout)
Add to cart Configure Quote in Ute Builder
The Cantilever Rack is a seriously robust optional extra for the Aluminium Canopy with a 200kg load capacity.
All utes are designed to flex in between the wellside and the cab. This can be problematic for a traditional roof rack setup that is mounted to both the cab and the canopy because it can cause damage while the flex occurs.
The Cantilever Roof Rack extends over the cab making it completely independent and eliminates the risk of damage to the cab! The Cantilever Rack is seriously useful and robust and is an optional extra for the Aluminium Canopy.
Fibreglass or ABS canopies can easily crack under stress.
Despite being lightweight, if engineered correctly aluminium can achieve a very high strength-to-weight ratio and withstand a significant amount of weight and stress without breaking.
This means you can carry much heavier loads than you ever could on a fibreglass or ABS canopy, without going over your Gross Vehicle Mass rating.
Using the hex-shaped tie-down points you can be sure your straps will sit firmly in place by crisscrossing between the hex cutouts on each side.
The cut-outs are also particularly useful if you are using straps with hooks to secure PVC pipe, kayaks or any trade and recreational gear.
Tie-downs often end up tangled up in the vehicle or chucked in with the gear in the tub.
The Utemaster Rachet Straps have a unique fitting bracket that is designed to mount to the Cantilever Roof Rack.
This bracket is fastened using wing bolts and can stay there permanently meaning you will always be ready to tie down your load.
Q.) What is the canopy load rated to?
A.) With a Cantilever Roof Tray fitted you can carry up to 200kg's of gear. The Cantilever Roof Tray evenly distributes weight across the canopy for maximum strength.
Q.) Can I mount the Cantilever Rack to another Canopy or Roof Rack?
A.) No, the Cantilever Rack and mounting kit is designed to work with the Utemaster Centurion Canopy.
Q) Can I retrofit the Cantilever Roof Rack to the Centurion Canopy?
A) Yes, the Cantilever Roof Rack can easily be fitted after purchase, see fitting instructions here.
LOGIN
1800 769 577